GE Constant On Lights Christmas Trees Questions and Answers

Christmas Trees With GE Constant On Lights

Common Questions and Answers regarding Artificial Christmas Tree and Christmas Lights

Q. Can I put blinking or flashing bulbs on my tree?
A. No
• The trees do not come with flashing or blinker bulbs
• It will void any remaining manufacturer's warranty if blinker bulbs are put on the tree
   Page top

Q. Can I add extra light sets to my pre-lit tree?
A. No
• The tree is not intended to be used with any extra electrical equipment.
• Adding extra light sets may cause fuses to blow and will void the warranty
   Page top

Q. Can I add a blinking or dimmer adapter to the tree?
A. No
• The tree is not intended to be used with any extra electrical equipment.
• Extra electrical equipment may cause tree fuses to blow
• It will void any remaining manufacturer's warranty.
   Page top

Q. If one light bulb burns out will the row continue to light?
A. Yes
• However, replace missing or burned out bulbs as soon as possible, extra current can cause other bulbs to burn out faster.
   Page top

Q. Can I change all the bulbs on my tree because I don't like the color or style?
A. It is not recommended. It can damage the lights if improperly removed from the socket.
• It will void the manufacturer's warranty.
   Page top


Q. Where are the spare replacement bulbs and fuses for the tree?
A. The replacement packet should be taped to one of the electrical cords. It is usually on the bottom row or the tree cord itself.
   Page top


Q. Can I put my pre-lit Christmas tree outside?
A. No
• The trees are intended for indoor use only
• Using the tree outdoors will void the warranty
   Page top

Q. Can I hang glass ornaments on the tree?
A. Yes, but do not put them directly on the wires for the lights
   Page top

Q. Why are needles falling off of my tree?
A. These pieces are from the trimming process at the factory. It is perfectly normal and the tree may continue to shed for a couple of years.
   Page top

Q. Why are the lowest set of branches smaller/shorter than the row above?
A. This is to enhance the appearance of the tree and is completely normal.
   Page top

Q. How do I pull the branches down on my Christmas Tree?
A. Make sure they are firmly seated in the holder and gently pull down. If you have to pull hard, the branch is not seated properly. Also, make sure any twine or string holding the branches up has been removed. The twine is the same color as the tree.
   Page top

Q. Can I make the tree taller?
A. No. Tree poles are designed to fit a particular tree and are not inter-changeable.
   Page top

Q. If one bulb falls out of my Constant On™ light set will the set stay lit?
A. Yes.
• However, replace missing or burned out bulbs as soon as possible, extra current can cause other bulbs to burn out faster.
   Page top

Q. What if I remove or break a circuit-limiting bulb from a Constant On™ set?
A. The set is damaged permanently and will not work.
   Page top


Q. Can I cut rope light or string sets to make them a certain length?
A. NO! This will violate UL electrical safety standards.
   Page top

 

Q. Can I paint the light bulbs?
A. No
• The manufacturer uses a special type of paint on light bulbs.
   Page top

Q. Can I use my lights longer than the Holiday season?
A. No
• Trees and lights are intended for seasonal use only (90 days) at a time.
• Using the lights longer may cause short life and will void the warranty
   Page top

Q. Where can I purchase a Santa's Best Craft tree or light set?
A. Santa's best products can be found all over Christmas Central. There are so many different types, its just to much to list. Just browse our huge selection of Christmas Merchandise..
   Page top

Q. Where can I buy replacement bulbs and fuses for my new tree or light set?
A. We will replace any light set still covered by the manufacturer's warranty.
Most retail outlets carry replacement bulbs and fuses for our trees and lights.
   Page top


Q. Can I buy direct from Santa's Best?
A. No
• Santa's Best is a manufacturer, licensed to sell to retail outlets, not the general public
   Page top


Q. How do I change the fuses in my trees or light sets?
A. Please review our trouble shooting guide for photos of step by step instructions.
• Fuses should fit snug in the holder.
   Page top


Q. How do I replace loose, broken or missing bulbs?
A. Please review our trouble shooting guide for photos of step by step instructions.
   Page top


Q. Where are the plug markings located?
A. On the bladed plug on the opposite side of where the fuses go in. There should be a GE emblem. Under the GE emblem you will find two letters and 2 numbers, this is the plug marking you will need when you call our customer service representative department.
   Page top

Q. Why can't I use my Animated ornaments with Constant On Lights?
A. The special design of bulb holder prevents anything other than the Constant On socket to be inserted.
   Page top

Common Questions and Technical Info

#1 Fastest Growing Company In Western NY.

Top 5,000 Fastest Growing Private Companies In The U.S. For Three Straight Years
Payment CCC Authorize
Dave's Christmas

Enter Email To Receive EXCLUSIVE Weekly Offers!   

Terms & Conditions | Privacy Policy
Copyright © 2013 Gordon Companies, Inc. All Rights Reserved.
"Christmas Central," "christmascentral.com," and the Christmas Central logo are trademarks of Gordon Companies, Inc., Cheektowaga, NY.
Christmas Central is Upfront